Skip to main content

Retiring installations

The following retire instructions apply for all installation types - Traps, Bait stations, and Monitoring stations. Installations can be made active again using the same procedure.

  1. Go to the Manage Traps page in your project (if you belong to more than one project, check that you are in the correct one)

  2. (Optional) If you have a lot of traps, you can search for the particular trap(s) that you want to retire using the filter bar. Click the green "Apply filter" button to show the filtered traps.
  3. From the Operations dropdown, select "Retire trap":

  4. Select the checkbox of the trap(s) that you want to retire, then click the "Execute" button.
    image-1627878210044.png
  5. Check you've selected the correct traps, then click the green "Confirm" button to retire them.