Using the app proximity function

Using the Trap.NZ app, you can automatically record trap checks along a line using your phone’s GPS. When using this function to walk a line, the app will record a default trap check when you are near a trap.

See also: Proximity service adjustments

How to use the app proximity function 

1. Select "Lines" from the app menu.

App menu

Before walking your first line - check your line settings. Select the cog symbol at the top right.

Lines settings button

Set your preferences (tap on the ? symbol to see more detail about the preference setting). The preferences will remain set for subsequent line checks.

Line settings

Hit the back arrow in the top left corner when you're done updating your Line Settings, to return to the Lines menu

Select the line you are servicing.

image-1645573325110.jpg

 

The traps on the line you selected will be listed (at the bottom of the screen, you can toggle between a list view and a map view of the line).

Line view with map toggle highlighted

From the list view, click the "Walk Line" button (top right) to begin.

 

 

Walk the line button on list view

The different types of trap you have on this line will be displayed, so you can set defaults for each trap type.

Line walk defaults

Enter a default value for each of the trap types on the line, then press "Continue".

Trap defaults on a line

After setting the default values, you will be shown the trap list again. Traps that haven’t had a check record against them yet will show as faded. You are ready to start walking the line.

WTL starting screen

As you walk the line, the traps that you pass will be highlighted with a green outline to show that a check has been recorded against them.

image-1645574873173.jpeg

An indicator bar at the top of the screen shows your progress through the line (green checked, black un-checked, red never-checked / new trap). 

At any point in time, you can manually select a trap and change from the default record. When you click save, the form for the next trap will be displayed, but you can press "Close" and go back to the line list/map view and continue walking.

image-1645575285481.jpeg

When you have finished walking the line, press Finish.

image-1645575309205.jpg

You will then be able to review and edit any records (if any need to be changed from the default), and deselect any records you don't want to save.

image-1645575394881.PNG

Press and hold the "SAVE LINE" button to submit the records.