Adding traps and stations
To add a station to your project:
- Locate where you want to add the station on the map. You can do this by:
- Using the pan and zoom controls to the desired location on the map, and press the Add button
in the bottom right of the screen. - If you are physically at the installation site, use the GPS button
to locate yourself on the map.
- Using the pan and zoom controls to the desired location on the map, and press the Add button
- If the location appears wrong, drag the reticule (black crosshairs with red dot in the middle) to the correct spot and press the green tick to confirm (or the red cross to cancel)
.
Choose which type of installation to add: Bait Station, Trap or Monitoring Site
